BAILII is celebrating 24 years of free online access to the law! Would you consider making a contribution?
No donation is too small. If every visitor before 31 December gives just £1, it will have a significant impact on BAILII's ability to continue providing free access to the law.
Thank you very much for your support!
 |
[Home] [Databases] [World Law] [Multidatabase Search] [Help] [Feedback] | |
United Kingdom Statutory Instruments |
||
|
You are here: BAILII >> Databases >> United Kingdom Statutory Instruments >> The Radio Equipment Regulations 2017 No. 1206 URL: http://www.bailii.org/uk/legis/num_reg/2017/uksi_20171206_en_1.html |
||
[New search] [Printable PDF version] [Help]
Statutory Instruments
Telecommunications
Made
4th December 2017
Laid before Parliament
5th December 2017
Coming into force
26th December 2017
The Secretary of State is a Minister designated(1) for the purposes of section 2(2) of the European Communities Act 1972(2) in relation to measures relating to radio equipment.
These Regulations make provision for a purpose mentioned in section 2(2) of the European Communities Act 1972 and it appears to the Secretary of State that it is expedient for certain references to provisions of EU instruments to be construed as references to those provisions as amended from time to time.
The Secretary of State makes these Regulations in exercise of the powers conferred by section 2(2) of, and paragraph 1A(3) of Schedule 2 to, the European Communities Act 1972.
1. These Regulations may be cited as the Radio Equipment Regulations 2017 and come into force on 26th December 2017.
2.-(1) In these Regulations-
"the 1987 Act" means the Consumer Protection Act 1987(4);
"accreditation" has the meaning set out in point 10 of Article 2 of RAMS (as amended from time to time);
"accreditation certificate" means a certificate, issued by either the United Kingdom Accreditation Service (a company limited by guarantee incorporated in England and Wales under number 03076190) or by a national accreditation body in another Member State, attesting that a conformity assessment body meets the notified body requirements;
"authorised representative" means a person appointed in accordance with regulation 19;
"CE marking" means a marking which takes the form set out in Annex II of RAMS (as amended from time to time);
"competent national authority" means an authority having responsibility for enforcing the law of a Member State which implements the Directive;
"conformity assessment" means the process demonstrating whether the essential requirements relating to radio equipment have been fulfilled;
"conformity assessment body" means a body that performs conformity assessment activities;
"distributor" means any person in the supply chain, other than the manufacturer, authorised representative or the importer, who makes radio equipment available on the market;
"the Directive" means Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment(5);
"economic operator" means a manufacturer, authorised representative, importer or distributor;
"electromagnetic disturbance" has the meaning set out in point (5) of paragraph 1 of Article 3 of Directive 2014/30/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to electromagnetic compatibility(6);
"enforcing authority" means any person enforcing these Regulations under regulation 56 (enforcement);
"essential requirements" means the requirements set out in regulation 6;
"EU declaration of conformity" means a declaration of conformity required to be drawn up in accordance with regulation 42 by regulation 10(1)(a) (EU declaration of conformity);
"European Commission" means the Commission of the European Union;
"harmful interference" has the meaning set out in point (r) of Article 2 of Directive 2002/21/EC of the European Parliament and of the Council on a common regulatory framework for electronic communications networks and services(7) (as amended from time to time);
"harmonised standard" has the meaning set out in Article 2(1)(c) of Regulation (EU) No 1025/2012 of the European Parliament and of the Council on European standardisation(8) (as amended from time to time);
"importer" means any person who-
is established within the EU; and
places radio equipment from a third country on the EU market;
"make available on the market" means any supply for distribution, consumption or use of radio equipment on the EU market in the course of a commercial activity, whether in return for payment or free of charge, and related expressions must be construed accordingly;
"manufacturer" means a person who-
manufactures radio equipment or has radio equipment designed or manufactured; and
markets that radio equipment under that person's name or trade mark;
"market surveillance authority" has the meaning set out in regulation 55 (designation of market surveillance authorities");
"national accreditation body" has the meaning set out in point 11 of Article 2 of RAMS (as amended from time to time);
"notified body requirements" means the requirements set out in Schedule 8 (notified body requirements);
"OFCOM" means the Office of Communications established under the Office of Communications Act 2002(9);
"Official Journal" means the Official Journal of the European Union;
"place on the market" means the first making available on the EU market of radio equipment, and related expressions must be construed accordingly;
"put into service" means the first use of radio equipment in the EU by its end-user for the purposes for which it was intended, and related expressions must be construed accordingly;
"radiodetermination" means the determination of the position, velocity and/or other characteristics of an object, or the obtaining of information relating to those parameters, by means of the propagation properties of radio waves;
"radio communication" means communication by means of radio waves;
"radio equipment" means-
an electrical or electronic product, which intentionally emits and/or receives radio waves for the purpose of radio communication and/or radiodetermination, or
an electrical or electronic product which must be completed with an accessory, such as antenna, so as to intentionally emit and/or receive radio waves for the purpose of radio communication and/or radiodetermination;
"radio waves" means electromagnetic waves of frequencies lower than 3,000 GHz, propagated in space without artificial guide;
"RAMS" means Regulation (EC) No 765/2008(10) of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products;
"recall" means taking any measure aimed at achieving the return of radio equipment that has already been made available to the end-user and related expressions must be construed accordingly;
"relevant conformity assessment procedure" means a conformity assessment procedure referred to in regulation 41 (conformity assessment procedures);
"relevant economic operator" means, in relation to radio equipment, an economic operator with obligations in respect of that radio equipment under Part 2;
"technical documentation" has the meaning set out in regulation 45 (technical documentation);
"technical specification" means a document that prescribes technical requirements to be fulfilled by radio equipment;
"weights and measures authority" means a local weights and measures authority within the meaning set out in section 69 of the Weights and Measures Act 1985(11);
"withdraw" means taking any measure aimed at preventing radio equipment in the supply chain from being made available on the market and related expressions must be construed accordingly.
(2) In these Regulations, a reference to radio equipment being "in conformity with Part 2" means that-
(a)the radio equipment is in conformity with the essential requirements, and
(b)each relevant economic operator has complied with the obligations imposed on them under Part 2 which must be satisfied at or before the time at which they make the radio equipment available on the market.
(3) In these Regulations (except in Part 4 (notification of conformity assessment bodies) and Schedules 8 (notified body requirements) and 9 (operational obligations of notified bodies)), "notified body" means-
(a)a notified body within the meaning set out in regulation 46 (notified bodies), or
(b)a notified body under the laws of any other Member State which implements the Directive.
(4) In regulations 18 and 26 (monitoring in relation to manufacturers and importers respectively) "risk" means a risk which could arise from lawful and readily predictable human behaviour.
(5) In the other provisions of these Regulations, "risk" means a risk-
(a)which could arise from lawful and readily predictable human behaviour, or
(b)of non-conformity with the essential requirements.
(6) In these Regulations, a reference to a Member State must be read as a reference to an EEA State and a reference to the EU must be read as a reference to the European Economic Area.
3.-(1) These Regulations apply to radio equipment.
(2) These Regulations do not apply to-
(a)radio equipment which has been placed on the market before the commencement date,
(b)equipment listed in Schedule 1 (radio equipment outside the scope of these Regulations), or
(c)radio equipment exclusively used for activities concerning public security, defence, State security (including the economic well-being of the State) or the activities of the State in the area of criminal law.
(3) Save as provided for in regulation 6(1)(a), radio equipment falling within the scope of these Regulations are not subject to Directive 2014/35/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits(12) or the Electrical Equipment (Safety) Regulations 2016(13).
(4) Save as provided for in regulation 6(1)(b), radio equipment falling within the scope of these Regulations are not subject to Directive 2014/30/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to electromagnetic compatibility or the Electromagnetic Compatibility Regulations 2016(14).
4.-(1) Nothing in these Regulations prevents the display, of radio equipment which does not comply with these Regulations, at a trade fair, exhibition or similar event provided that a visible sign clearly indicates that the radio equipment-
(a)is not in conformity with Part 2, and
(b)may not be made available on the market or put into service until it has been brought into conformity with Part 2.
(2) Nothing in these Regulations prevents the demonstration, of radio equipment which does not comply with these Regulations, at a trade fair, exhibition or similar event provided that all reasonable measures have been taken to avoid harmful interference, electromagnetic disturbances and risk to health and safety of persons, domestic animals or property.
5.-(1) Nothing in these Regulations prevents the putting into service and use of radio equipment in the United Kingdom which is in conformity with these Regulations when the radio equipment is properly installed, maintained and used for its intended purpose.
(2) Nothing in these Regulations prevents the application of additional requirements for the putting into service or use of radio equipment in the United Kingdom for reasons related to-
(a)the effective and efficient use of the radio spectrum,
(b)the avoidance of harmful interference,
(c)the avoidance of electromagnetic disturbances, or
(d)public health.
6.-(1) Radio equipment must be constructed so as to ensure-
(a)the protection of health and safety of persons and of domestic animals and the protection of property, including the objectives with respect to safety requirements set out in Directive 2014/35/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (but as if there were no voltage limit),
(b)an adequate level of electromagnetic compatibility as set out in Directive 2014/30/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to electromagnetic compatibility.
(2) Radio equipment must be constructed so that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.
7. Before placing radio equipment on the market, a manufacturer must ensure that it has been designed and manufactured in accordance with the essential requirements.
8. Before placing radio equipment on the market, a manufacturer must ensure it has been constructed so that the radio equipment can be operated in at least one Member State without causing an infringement of the applicable requirements on the use of the radio spectrum in the relevant Member State or Member States.
9. Before placing radio equipment on the market, a manufacturer must-
(a)draw up the relevant technical documentation in accordance with regulation 45 (technical documentation), and
(b)ensure the relevant conformity assessment procedure is carried out.
10.-(1) Where the compliance of radio equipment with the essential requirements has been demonstrated by a relevant conformity assessment procedure, the manufacturer must, before placing the radio equipment on the market-
(a)draw up an EU declaration of conformity in accordance with regulation 42 (EU declaration of conformity), and
(b)affix the CE marking in accordance with regulation 44 (CE marking).
(2) The manufacturer must keep the EU declaration of conformity up to date.
(3) Where radio equipment is subject to more than one EU instrument requiring an EU declaration of conformity to be drawn up, the manufacturer must draw up a single EU declaration of conformity which-
(a)meets the requirements of all of the EU instruments concerned,
(b)identifies the EU instruments, and
(c)includes references to the publication of those EU instruments in the Official Journal.
11. A manufacturer must, for a period of 10 years beginning on the day on which the radio equipment is placed on the market, keep and, upon request, make available to an enforcing authority the following in relation to radio equipment-
(a)a copy of the EU declaration of conformity, and
(b)the technical documentation.
12.-(1) Before placing radio equipment on the market, a manufacturer must ensure that the radio equipment bears-
(a)a type, batch or serial number, or
(b)another element which allows the radio equipment to be identified.
(2) Before placing radio equipment on the market, a manufacturer must indicate on the radio equipment-
(a)the name, registered trade name or registered trade mark of the manufacturer,
(b)a postal address at which the manufacturer can be contacted.
(3) The information specified in paragraph (2) must be in a language which can be easily understood by end-users and the competent national authority in the Member State in which it is to be made available to such end-users.
(4) Where the size or nature of the radio equipment prohibits a manufacturer from complying with the requirement in paragraph (1) or paragraph (2), the manufacturer must provide the required information either on the radio equipment's packaging or in a document which accompanies the radio equipment.
(5) The manufacturer's postal address must indicate a single point at which the manufacturer can be contacted.
13.-(1) When placing radio equipment on the market, a manufacturer must ensure that radio equipment is accompanied with instructions and safety information which-
(a)are in a language which can be easily understood by consumers and other end-users in the Member State in which the radio equipment is to be made available to such consumers and other end-users,
(b)include information required to use the radio equipment in accordance with its intended use,
(c)include a description of accessories and components, including software, which allow the radio equipment to operate as intended, and
(d)are clear and understandable.
(2) In the case of radio equipment which can intentionally emit radio waves, the manufacturer must also include information about-
(a)the frequency band or bands in which the radio equipment can operate, and
(b)the maximum radio-frequency power transmitted in the frequency band or bands in which the radio equipment operates.
(3) When placing radio equipment on the market, a manufacturer must ensure that each item of radio equipment is accompanied by either a copy of the EU declaration of conformity or a simplified EU declaration of conformity drawn up in accordance with regulation 43 (simplified EU declaration of conformity).
(4) Where the radio equipment is to be made available to consumers and other end-users in the United Kingdom, the language which can be easily understood is English.
14.-(1) Where there are restrictions on putting into service or requirements for authorisation of use, a manufacturer must include information on the packaging of the radio equipment which identifies the Member States and the geographical area within a Member State where the restrictions on putting into service or the requirements for authorisation of use exist.
(2) The information referred to in paragraph (1) must-
(a)be completed in the instructions required by regulation 13,
(b)subject to paragraph (3), be presented in the manner and form specified in Commission Implementing Regulation specifying how to present the information provided for in Article 10(10) of Directive 2104/53/EU of the European Parliament and the Council (EU) 2017/1354(15).
(3) Paragraph (2)(b) of this Regulation applies to radio equipment placed on the market or after 8th August 2018.
15.-(1) A manufacturer who considers, or has reason to believe, that radio equipment which they have placed on the market is not in conformity with Part 2, if appropriate, must immediately take the corrective measures necessary to-
(a)bring the radio equipment into conformity,
(b)withdraw the radio equipment, or
(c)recall the radio equipment.
(2) Where the radio equipment presents a risk, the manufacturer must immediately inform the market surveillance authority, and the competent national authorities of any other Member State in which the manufacturer made the radio equipment available on the market, of the risk, giving details of-
(a)the respect in which the radio equipment is considered not to be in conformity with Part 2, and
(b)any corrective measures taken and the results of those measures.
16.-(1) Further to a request from-
(a)an enforcing authority, where radio equipment has been placed by a manufacturer on the market in the United Kingdom, or
(b)a competent national authority, where the radio equipment has been placed by a manufacturer on the market in another Member State,
the manufacturer must, within such reasonable period as the authority may specify, provide the authority concerned with all the information and documentation necessary to demonstrate that the radio equipment is in conformity with Part 2.
(2) A request referred to in paragraph (1)-
(a)is one that was made during the period of 10 years beginning on the day that the manufacturer places the radio equipment on the market, and
(b)must be accompanied by the reasons for making the request.
(3) The information referred to in paragraph (1)-
(a)may be provided in electronic form, and
(b)must be in a language which can be easily understood by the authority concerned.
(4) A manufacturer must, at the request of the authority concerned, cooperate with that authority on any action taken to-
(a)evaluate radio equipment in accordance with regulation 59 (evaluation of radio equipment presenting a risk),
(b)eliminate the risks posed by radio equipment which the manufacturer has placed on the market.
17.-(1) A manufacturer must ensure, before placing radio equipment on the market, that procedures are in place to ensure that series production remains in conformity with Part 2.
(2) In doing so, the manufacturer must take adequate account of-
(a)any change in radio equipment design or characteristics, and
(b)any change in a harmonised standard or in another technical specification by reference to which the EU declaration of conformity was drawn up.
18.-(1) When appropriate, with regard to the risks to the health and safety of end-users presented by radio equipment, a manufacturer must-
(a)carry out sample testing of radio equipment manufactured by it which has been made available on the market,
(b)investigate complaints that radio equipment manufactured by it is not in conformity with Part 2,
(c)keep a register of-
(i)complaints that radio equipment is not in conformity with Part 2,
(ii)radio equipment which is not in conformity with Part 2, and
(iii)radio equipment recalls, and
(d)keep distributors informed of any monitoring carried out under this regulation.
(2) A manufacturer must keep an entry made in the register for a period of at least 10 years beginning on the day on which the obligation to make the entry arose.
19.-(1) A manufacturer may, by written mandate, appoint a person established within the EU as their authorised representative to perform specified tasks on that manufacturer's behalf.
(2) The authorised representative must perform the tasks specified in the mandate.
(3) The mandate must allow the authorised representative to do at least the following-
(a)perform the manufacturer's obligations under regulation 11 (retention of technical documentation and EU declaration of conformity),
(b)perform the manufacturer's obligations under regulation 16 (provision of information and cooperation).
(4) The mandate must not include the obligations contained in-
(a)regulation 7 (design and manufacture in accordance with essential requirements),
(b)regulation 9 (technical documentation and conformity assessment), or
(c)regulation 10 (EU declaration of conformity and CE marking).
(5) An authorised representative must comply with all the obligations imposed on the manufacturer by these Regulations which relate to the tasks that the authorised representative is appointed by the manufacturer to perform and, accordingly-
(a)as far as those obligations are concerned, references in these Regulations to the manufacturer are to be taken as including a reference to the authorised representative, and
(b)if the authorised representative contravenes or fails to comply with any of those obligations, the authorised representative may be proceeded against as though the authorised representative was the manufacturer.
(6) A manufacturer who has appointed an authorised representative to perform, on the manufacturer's behalf, an obligation under these Regulations remains responsible for the proper performance of that obligation.
20. An importer must not place radio equipment on the market unless it is in conformity with the essential requirements.
21. Before placing radio equipment on the market, an importer must ensure that-
(a)a relevant conformity assessment has been carried out by the manufacturer,
(b)that the radio equipment has been constructed so that it can be operated in at least one Member State without causing an infringement of the applicable requirements on the use of the radio spectrum in the relevant Member State or Member States,
(c)the manufacturer has drawn up the technical documentation,
(d)the radio equipment-
(i)bears the CE marking, and
(ii)is accompanied by the information and documents referred to in regulations 13 (instructions and information to be included with the radio equipment) and 14 (information to be included where there are restrictions on putting into service or requirements for authorisation of use),
(e)the manufacturer has complied with the requirements set out in regulation 12 (identification of the radio equipment and manufacturer).
22.-(1) Where an importer considers, or has reason to believe, that radio equipment is not in conformity with the essential requirements, the importer must not place the radio equipment on the market.
(2) Where the radio equipment presents a risk, the importer must inform the manufacturer and the market surveillance authority of that risk.
23.-(1) Before placing radio equipment on the market, an importer must indicate on the radio equipment-
(a)the name, registered trade name or registered trade mark of the importer, and
(b)a postal address at which the importer can be contacted.
(2) The information specified in paragraph (1) must be in a language which can be easily understood by end-users and the competent national authority in the Member State in which it is to be made available to such end-users.
(3) Where it is not possible to indicate the information specified in paragraph (1) on the radio equipment, the importer must indicate that information-
(a)on the packaging, or
(b)in a document accompanying the radio equipment.
24.-(1) When placing radio equipment on the market, an importer must ensure that it is accompanied by instructions and safety information in a language which can be easily understood by consumers and other end-users in the Member State in which the radio equipment is to be made available to such consumers and other end-users.
(2) Where the radio equipment is being made available to consumers and other end-users in the United Kingdom, the language which can be easily understood by consumers and other end-users is English.
25. Where an importer has responsibility for radio equipment, the importer must ensure that the conditions under which the radio equipment is stored or transported do not jeopardise the radio equipment's conformity with the essential requirements.
26.-(1) When appropriate, with regard to the risks to the health and safety of end-users presented by radio equipment, an importer must-
(a)carry out sample testing of radio equipment made available by the importer on the market,
(b)investigate complaints that radio equipment made available on the market by the importer is not in conformity with Part 2,
(c)keep a register of-
(i)complaints that radio equipment is not in conformity with Part 2,
(ii)radio equipment which is not in conformity with Part 2, and
(iii)radio equipment recalls, and
(d)keep distributors informed of any monitoring carried out under this regulation.
(2) An importer must keep an entry made in the register for a period of at least 10 years beginning on the day on which the obligation to make the entry arose.
27.-(1) An importer who considers, or has reason to believe, that radio equipment which they have placed on the market is not in conformity with Part 2 must immediately take the corrective measures necessary to-
(a)bring the radio equipment into conformity,
(b)withdraw the radio equipment, or
(c)recall the radio equipment.
(2) Where the radio equipment presents a risk, the importer must immediately inform the market surveillance authority, and the competent national authorities of any other Member State in which the importer made the radio equipment available on the market, of the risk, giving details of-
(a)the respect in which the radio equipment is considered not to be in conformity with Part 2, and
(b)any corrective measures taken.
28. An importer must, for a period of 10 years beginning on the day on which the radio equipment is placed on the market, upon request, make available to an enforcing authority the following in relation to radio equipment-
(a)a copy of the EU declaration of conformity, and
(b)the technical documentation.
29.-(1) Further to a reasoned request from an enforcing authority or a competent national authority of another Member State, an importer, within such period as the authority may specify, must provide the authority with all the information and documentation necessary to demonstrate that the radio equipment is in conformity with Part 2.
(2) A request referred to in paragraph (1)-
(a)may only be made during the period of 10 years beginning on the day that the importer places the radio equipment on the market, and
(b)must be accompanied by the reasons for making the request.
(3) The information referred to in paragraph (1)-
(a)may be provided in electronic form, and
(b)must be in a language which can be easily understood by the authority concerned.
(4) An importer must, at the request of the enforcing authority or the competent national authority, cooperate with the authority on any action taken to-
(a)evaluate radio equipment in accordance with regulation 59 (evaluation of radio equipment presenting a risk),
(b)eliminate the risks posed by radio equipment which the importer has placed on the market.
30. When making radio equipment available on the market, a distributor must act with due care to ensure that it is in conformity with Part 2.
31.-(1) Before making radio equipment available on the market, the distributor must verify that-
(a)the radio equipment-
(i)bears the CE marking,
(ii)is accompanied by the required documents,
(iii)is accompanied by instructions and safety information in a language which can be easily understood by consumers and other end-users in the Member State in which the radio equipment is to be made available on the market,
(b)the manufacturer has complied with the requirements set out in-
(i)regulation 8 (construction must allow operation in at least one Member State),
(ii)regulation 12 (identification of the radio equipment and manufacturer),
(iii)regulation 13 (instructions and information to be included with the radio equipment),
(iv)regulation 14 (information to be included where there are restrictions on putting into service or requirements for authorisation of use), and
(c)the importer has complied with the requirements set out in regulation 23 (information identifying importer).
(2) Where the radio equipment is to be made available to consumers and other end-users in the United Kingdom, the language which can easily be understood is English.
(3) In paragraph (1)(a)(ii), "required documents" means any documents that are required to be provided pursuant to regulations 12(4), 14 and 23(3).
32.-(1) Where a distributor considers, or has reason to believe, that radio equipment is not in conformity with the essential requirements, the distributor must not make the radio equipment available on the market.
(2) Where the radio equipment presents a risk, the distributor must inform the following persons of the risk-
(a)the manufacturer or, where appropriate, the importer, and
(b)the market surveillance authority.
33. Where a distributor has responsibility for radio equipment, the distributor must ensure that the conditions under which it is stored or transported do not jeopardise the radio equipment's conformity with the essential requirements.
34.-(1) A distributor who considers, or has reason to believe, that radio equipment which the distributor has made available on the market is not in conformity with Part 2 must make sure that the necessary corrective measures are taken to-
(a)bring that radio equipment into conformity,
(b)withdraw the radio equipment, or
(c)recall the radio equipment.
(2) Where the radio equipment presents a risk, the distributor must immediately inform the market surveillance authority, and the competent national authorities of the other Member States in which the distributor has made the radio equipment available on the market, of that risk, giving details of-
(a)the respect in which the radio equipment is considered not to be in conformity with Part 2, and
(b)any corrective measures taken.
35.-(1) Further to a reasoned request from an enforcing authority or a competent national authority of another Member State, a distributor, within such period as the authority may specify, must provide the authority with all the information and documentation necessary to demonstrate that the radio equipment is in conformity with Part 2.
(2) A request referred to in paragraph (1)-
(a)may only be made during the period of 10 years beginning on the day on which the radio equipment was made available on the market, and
(b)must be accompanied by the reasons for making the request.
(3) The information referred to in paragraph (1)-
(a)may be provided in electronic form, and
(b)must be in a language which can be easily understood by the authority concerned.
(4) A distributor must, at the request of the enforcing authority or a competent national authority of another Member State, cooperate with the authority on any action taken to-
(a)evaluate radio equipment in accordance with regulation 59 (evaluation of radio equipment presenting a risk), and
(b)eliminate the risks posed by radio equipment which the distributor has made available on the market.
36. An economic operator ("A") who would, but for this regulation, be considered an importer or distributor, is to be considered a manufacturer for the purposes of these Regulations and is subject to the obligations of a manufacturer under Part 2, where A-
(a)places radio equipment on the market under A's own name or trademark, or
(b)modifies radio equipment already placed on the market in such a way that it may affect whether the radio equipment is in conformity with Part 2.
37.-(1) Before placing radio equipment on the market or making radio equipment available on the market, an economic operator must ensure that the EU declaration of conformity and, where appropriate, the simplified EU declaration of conformity is prepared in, or translated into, the language required by the Member State in which it is to be placed on the market or made available on the market.
(2) Where the radio equipment is to be placed on the market or made available on the market in the United Kingdom, the language required is English.
38.-(1) An economic operator ("E"), who receives a request from the market surveillance authority before the end of the relevant period, must, within such period as the authority may specify, identify to the authority-
(a)any economic operator who has supplied E with radio equipment, and
(b)any economic operator to whom E has supplied radio equipment.
(2) The relevant period is-
(a)for information under paragraph (1)(a), 10 years beginning on the day on which E was supplied with the radio equipment,
(b)for information under paragraph (1)(b), 10 years beginning on the day on which E supplied the radio equipment.
39.-(1) An economic operator must not affix the CE marking to radio equipment unless-
(a)that economic operator is the manufacturer, and
(b)the conformity of the radio equipment with the essential requirements has been demonstrated by a relevant conformity assessment procedure.
(2) An economic operator must not affix to radio equipment a marking other than the CE marking which purports to attest that the radio equipment is in conformity with the essential requirements.
(3) An economic operator must not affix to radio equipment a marking, sign or inscription which is likely to mislead any other person as to the meaning or form of the CE marking.
(4) An economic operator must not affix to radio equipment any other marking if the visibility, legibility and meaning of the CE marking would be impaired as a result.
40.-(1) Radio equipment which is in conformity with a harmonised standard (or part of such a standard), the reference to which has been published in the Official Journal, must be presumed to be in conformity with the essential requirements covered by that standard (or that part of that standard).
(2) The presumption in paragraph (1) is rebuttable.
41.-(1) The manufacturer must perform a conformity assessment of the radio equipment, in all its possible configurations, with a view to meeting the essential requirements.
(2) The conformity assessment must take into account all intended operating conditions.
(3) In relation to the assessment of compliance with regulation 6(1)(a), the conformity assessment must also take into account all reasonably foreseeable conditions.
(4) In relation to the assessment of compliance with regulation 6(1)(a) or (b), one of the following procedures must be used-
(a)internal production control set out in Schedule 2 (conformity assessment module A),
(b)EU-type examination that is followed by the conformity to type based on internal production control set out in Schedule 3 (conformity assessment modules B and C),
(c)conformity based on full quality assurance set out in Schedule 4 (conformity assessment module H).
(5) In relation to the assessment of compliance with regulation 6(2), where the manufacturer has applied harmonised standards, the references of which have been published in the Official Journal, the manufacturer must use one of the procedures in paragraph (4) for the conformity assessment.
(6) In relation to the assessment of compliance with regulation 6(2), where the manufacturer has not applied or has only partly applied harmonised standards, the references of which have been published in the Official Journal, or where harmonised standards do not exist, the manufacturer must use the procedure in either paragraph (4)(b) or paragraph (4)(c).
42. The EU declaration of conformity for radio equipment must-
(a)state that the fulfilment of the essential requirements has been demonstrated in respect of that radio equipment,
(b)contain the elements specified and have the model structure set out in Schedule 6 (EU declaration of conformity) for the relevant conformity assessment procedure followed in respect of that radio equipment.
43.-(1) Where only a simplified EU declaration of conformity is provided pursuant to regulation 13(3), it must contain the elements specified and have the model structure set out in Schedule 7 (simplified EU declaration of conformity).
(2) The full text of the EU declaration of conformity must be made available at the internet address referred to in the simplified EU declaration of conformity.
44.-(1) The CE marking must be affixed visibly, legibly and indelibly to the radio equipment or to its data plate, unless that is not possible or not warranted on account of the nature of the radio equipment.
(2) The CE marking must be affixed visibly and legibly to the radio equipment packaging.
(3) On account of the nature of the radio equipment, the height of the CE marking affixed to radio equipment may be lower than 5 mm, provided that the marking remains visible and legible.
(4) When the conformity assessment procedure in Schedule 4 (conformity assessment module H) has been applied, the CE marking must be followed by the identification number of the notified body which carried out the relevant conformity assessment procedure for the radio equipment.
(5) The identification number in paragraph (4) must have the same height as the CE marking and be affixed-
(a)by the notified body itself, or
(b)under the instructions of the notified body, by the manufacturer or the manufacturer's authorised representative.
45.-(1) The technical documentation produced by the manufacturer for the radio equipment must contain all the relevant data or details of the means used by the manufacturer to ensure that the radio equipment complies with the essential requirements.
(2) The technical documentation in paragraph (1) must-
(a)contain, at least, the elements set out in Schedule 5 (contents of technical documentation),
(b)be drawn up before the radio equipment is placed on the market, and
(c)be continuously updated.
(3) The technical documentation in paragraph (1) and correspondence relating to any EU-type examination procedure must be drawn up in an official language of the Member State in which the notified body is established or in a language acceptable to that body.
(4) Where the technical documentation does not comply with the requirements in paragraphs (1), (2) or (3) and in doing so fails to present sufficient relevant data or details of the means used to ensure compliance of radio equipment with the essential requirements, the market surveillance authority may ask the manufacturer or importer to have a test performed, within a specified period, by a body acceptable to the market surveillance authority, at the expense of the manufacturer or the importer to verify conformity with the essential requirements.
46.-(1) For the purposes of this Part, a notified body is a conformity assessment body-
(a)which has been notified by the Secretary of State to the European Commission and to the other Member States-
(i)under regulation 47 (notification), or
(ii)before the commencement date, in accordance with Article 22 of the Directive, and
(b)in respect of which no objections are raised by the European Commission or other Member States-
(i)within 2 weeks of the date of notification, where the notification is accompanied by an accreditation certificate, or
(ii)within 2 months of the date of notification, where the notification is not accompanied by an accreditation certificate.
(2) Paragraph (1) has effect subject to regulation 52 (changes to notifications).
47.-(1) The Secretary of State may notify to the European Commission and the other Member States only those conformity assessment bodies that qualify for notification.
(2) A conformity assessment body qualifies for notification if the first and the second conditions below are met.
(3) The first condition is that the conformity assessment body applied to the Secretary of State to become a notified body and that application was accompanied by-
(a)a description of-
(i)the conformity assessment activities that the body intends to carry out,
(ii)the conformity assessment module or modules for which the body claims to be competent, and
(iii)the radio equipment for which the body claims to be competent, and
(b)either-
(i)an accreditation certificate, or
(ii)the documentary evidence necessary for the Secretary of State to verify, recognise and regularly monitor the body's compliance with the notified body requirements.
(4) The second condition is that the Secretary of State is satisfied that the conformity assessment body meets the notified body requirements.
(5) For the purposes of paragraph (4), the Secretary of State may accept an accreditation certificate, provided in accordance with paragraph (3)(b), as sufficient evidence that the conformity assessment body meets the notified body requirements.
(6) When deciding whether to notify a conformity assessment body that qualifies for notification to the European Commission and the other Member States, the Secretary of State may-
(a)have regard to any other matter which appears to the Secretary of State to be relevant, and
(b)set conditions that the conformity assessment body must meet.
(7) The Secretary of State must inform the European Commission of the United Kingdom's procedures for the assessment and notification of conformity assessment bodies, and any changes to those procedures.
48.-(1) Where a conformity assessment body demonstrates its conformity with the criteria laid down in a harmonised standard (or part of such a standard), the reference of which has been published in the Official Journal, the Secretary of State must presume that the conformity assessment body meets the notified body requirements covered by that standard (or part of that standard).
(2) The presumption in paragraph (1) is rebuttable.
49. A notification under regulation 47 (notification) must include-
(a)details of-
(i)the conformity assessment activities,
(ii)the conformity assessment module,
(iii)the radio equipment,
in respect of which the conformity assessment body has been approved by the Secretary of State for notification, and
(b)either-
(i)an accreditation certificate, where the notification is based on the accreditation, or
(ii)documentary evidence which attests to the conformity assessment body's competence, and to the arrangements in place to ensure that the conformity assessment body will be monitored regularly and will continue to meet the notified body requirements.
50.-(1) The Secretary of State must monitor each notified body with a view to verifying that the notified body-
(a)continues to meet the notified body requirements,
(b)meets any conditions set in accordance with regulation 47(6)(b), and
(c)carries out its functions in accordance with these Regulations.
(2) The Secretary of State must inform the European Commission of the United Kingdom's procedures for the monitoring of notified bodies, and any changes to those procedures.
51. The Secretary of State may authorise the United Kingdom Accreditation Service (a company limited by guarantee incorporated in England and Wales under number 03076190) to carry out the following activities on behalf of the Secretary of State-
(a)assessing whether a conformity assessment body meets the notified body requirements,
(b)monitoring notified bodies in accordance with regulation 50 (monitoring).
52.-(1) The Secretary of State must restrict, suspend or withdraw a notified body's status as a notified body under regulation 46 where the Secretary of State determines that the body-
(a)no longer meets a notified body requirement, or
(b)is failing to fulfil its obligations under these Regulations, other than a condition set in accordance with regulation 47(6)(b).
(2) The Secretary of State may restrict, suspend or withdraw the notified body's status as a notified body under regulation 46-
(a)with the consent of a notified body, or
(b)where the Secretary of State determines that a notified body no longer meets a condition set in accordance with regulation 47(6)(b).
(3) In deciding what action is required under paragraph (1) or (2), the Secretary of State must have regard to the seriousness of the failure.
(4) Before taking action under paragraph (1) or (2), the Secretary of State must-
(a)give notice in writing to the notified body that the Secretary of State intends to take such action and the reasons for taking such action, and
(b)give the notified body an opportunity to make representations within a reasonable period from the date of that notice and consider any such representations.
(5) Where the Secretary of State takes action under paragraph (1) or (2), the Secretary of State must immediately inform the European Commission and the other Member States.
(6) Where the Secretary of State has taken action in respect of a notified body under paragraph (1) or (2), or where a notified body has ceased its activity, the body must-
(a)as directed by the Secretary of State, transfer its files relating to the activities it has undertaken as a notified body to another notified body or to the Secretary of State, or
(b)keep the documents relating to the activities it has undertaken as a notified body available for the Secretary of State and the enforcing authority for a period of 10 years from the date on which the product to which the document relates was placed on the market.
53. When a notified body carries out a relevant conformity assessment procedure, Schedule 9 (operational obligations of notified bodies) has effect.
54.-(1) Where a notified body subcontracts specific conformity assessment activities, or has such activities carried out by a subsidiary, the activities are only to be treated as having been carried out by a notified body for the purposes of regulation 41 (conformity assessment procedures) where the conditions in paragraphs (2) and (3) are met.
(2) The notified body must-
(a)ensure that the subcontractor or subsidiary satisfies the notified body requirements, and
(b)inform the Secretary of State accordingly.
(3) The notified body must have obtained the agreement of the client to the use of a subcontractor or subsidiary.
(4) Where a notified body subcontracts specific conformity assessment activities, or has such activities carried out by a subsidiary, the notified body must for a period of at least 10 years beginning on the day on which the activities are carried out, keep available for inspection by the Secretary of State all the relevant documentation concerning-
(a)the assessment of the qualifications of the subcontractor or the subsidiary, and
(b)the conformity assessment activities carried out by the subcontractor or subsidiary under Schedule 3 (conformity assessment modules B and C) or Schedule 4 (conformity assessment module H).
(5) When monitoring a notified body in accordance with regulation 50, the Secretary of State must treat the notified body as responsible for the activities performed by a subcontractor or subsidiary, wherever the subcontractor or subsidiary is established.
55.-(1) The market surveillance authority is-
(a)within its area in Great Britain, the weights and measures authority, and
(b)within its area in Northern Ireland, the district council.
(2) The market surveillance authority must make adequate arrangements for market surveillance under these Regulations and RAMS (in its application to radio equipment).
(3) When a market surveillance authority carries out market surveillance under these Regulations, Part 2 of Schedule 10 (notices which may be served by enforcing authorities) has effect.
56.-(1) It is the duty of the following authorities to enforce these Regulations and RAMS (in its application to radio equipment)-
(a)in Great Britain-
(i)OFCOM, insofar as action taken to enforce these Regulations relates to the protection and management of the radio spectrum,
(ii)within their area, the weights and measures authorities.
(b)in Northern Ireland-
(i)OFCOM, insofar as action taken to enforce these Regulations relates to the protection and management of the radio spectrum,
(ii)within their area, the district councils.
(2) The Secretary of State, or a person appointed by the Secretary of State to act on behalf of the Secretary of State, may enforce these Regulations and RAMS (in its application to radio equipment).
(3) In Scotland, only the Lord Advocate may commence proceedings for an offence.
57.-(1) For the purposes of enforcing these Regulations, Schedule 10 (enforcement and investigatory powers) applies.
(2) Where the enforcing authority has reasonable grounds to suspect that the CE marking has been affixed to radio equipment which does not satisfy the essential requirements, it may serve a compliance notice on-
(a)the manufacturer, if the manufacturer is established in the United Kingdom,
(b)the manufacturer's authorised representative in the United Kingdom, or
(c)the importer.
(3) Where a compliance notice is served in accordance with paragraph (2), no other notice as referred to in Part 2 of Schedule 10 can be issued and no proceedings pursuant to regulation 63 (enforcement action in respect of formal non-compliance) can be brought, until the person on whom that notice has been served has failed to comply with its requirements.
(4) A compliance notice must-
(a)state that the enforcing authority suspects that the CE marking has been affixed pursuant to regulation 44 (CE marking) in circumstances where that radio equipment does not comply with the requirements of these Regulations,
(b)state the reasons for that suspicion,
(c)identify the requirements with which it is suspected that the radio equipment does not comply,
(d)specify a date by which any necessary action to remedy non-compliance must have been taken,
(e)require the person on whom the notice is served to-
(i)take the necessary action to ensure that the radio equipment to which the notice relates conforms with the requirements of these Regulations and RAMS concerning the CE marking and to end the infringement by the date specified in the notice, or
(ii)to provide evidence, by the date specified in the notice, that demonstrates to the satisfaction of the enforcement authority that all provisions of these Regulations which apply to the radio equipment have been complied with, and
(f)warn the person on whom the notice is served that if the radio equipment does not comply with the requirements of these Regulations by the date specified in the notice, further enforcement action may be taken under these Regulations in respect of the radio equipment referred to in the notice or any radio equipment of the same type placed on the market by that person.
(5) A compliance notice may include directions as to the measures to be taken by the person upon whom it is served in order to ensure that the radio equipment complies with the requirements of these Regulations which apply to it, by the date specified in the notice.
(6) In this regulation, "enforcement officer" means-
(a)an officer of an enforcing authority who is authorised in writing by that authority to act as an enforcement officer for the purposes of this Part,
(b)a person appointed by the Secretary of State who is authorised in writing by the Secretary of State to act as an enforcement officer for the purposes of this Part.
58. When enforcing these Regulations, the enforcing authority must exercise its powers in a manner which is consistent with-
(a)regulation 59 (evaluation of radio equipment presenting a risk),
(b)regulation 60 (enforcement action in respect of radio equipment which is not in conformity and which presents a risk),
(c)regulation 61 (EU safeguard procedure),
(d)regulation 62 (enforcement action in respect of radio equipment which is in conformity, but presents a risk),
(e)regulation 63 (enforcement action in respect of formal non-compliance),
(f)regulation 64 (restrictive measures).
59.-(1) Where a market surveillance authority has sufficient reason to believe that radio equipment presents a risk, that authority must carry out an evaluation in relation to the radio equipment covering the relevant requirements of Part 2 applying in respect of that radio equipment.
(2) Where an enforcing authority other than the market surveillance authority has sufficient reason to believe that radio equipment presents a risk, that authority may carry out an evaluation in relation to the radio equipment covering the relevant requirements of Part 2 applying in respect of that radio equipment.
60.-(1) Where, in the course of the evaluation referred to in regulation 59, an enforcing authority finds that the radio equipment is not in conformity with Part 2, it must without delay require a relevant economic operator to-
(a)take appropriate corrective actions to bring the radio equipment into conformity with those requirements,
(b)withdraw the radio equipment, or
(c)recall the radio equipment,
within such reasonable period as the authority prescribes, which is commensurate with the nature of the risk presented by the radio equipment.
(2) The enforcing authority must inform the notified body which carried out the conformity assessment procedure in respect of the radio equipment of-
(a)the respect in which the radio equipment is not in conformity with Part 2, and
(b)the actions which the enforcing authority has required the economic operator to take.
(3) Where the enforcing authority is not the Secretary of State and it considers that the lack of conformity referred to in paragraph (1) is not restricted to the United Kingdom, it must notify the Secretary of State of-
(a)the results of the evaluation, and
(b)the actions which it has required the economic operator to take.
(4) Where the Secretary of State receives notification under paragraph (3), or otherwise considers that the lack of conformity referred to in paragraph (1) is not restricted to the United Kingdom, the Secretary of State must inform the European Commission and the other Member States of-
(a)the results of the evaluation, and
(b)any actions which the enforcing authority has required the economic operator to take.
(5) Where the relevant economic operator does not take adequate corrective action within the prescribed period, the enforcing authority must take appropriate measures to-
(a)prohibit or restrict the radio equipment being made available on the market in the United Kingdom,
(b)withdraw the radio equipment from the United Kingdom market, or
(c)recall the radio equipment.
(6) Where the enforcing authority is not the Secretary of State and it takes measures under paragraph (5), it must notify the Secretary of State of those measures without delay.
(7) Where the Secretary of State receives notification under paragraph (6), or takes measures under paragraph (5), the Secretary of State must notify the European Commission and the other Member States of those measures without delay.
(8) The notifications under paragraphs (6) and (7) must include details about the radio equipment and, in particular-
(a)the data necessary for the identification of the radio equipment which is not in conformity with Part 2,
(b)the origin of the radio equipment,
(c)the nature of the lack of conformity alleged and the risk involved,
(d)the nature and duration of the measures taken,
(e)the arguments put forward by the relevant economic operator, and
(f)whether the lack of conformity is due to either of the following-
(i)failure of the radio equipment to meet the essential requirements, or
(ii)shortcomings in the harmonised standards referred to in regulation 40 (presumption of conformity) conferring a presumption of conformity.
61.-(1) Where another Member State has initiated the procedure under Article 40 of the Directive (as amended from time to time), each enforcing authority (other than the Secretary of State) must, without delay, inform the Secretary of State of-
(a)any measure taken by the enforcing authority in respect of the radio equipment, and
(b)any additional information which the enforcing authority has at its disposal relating to the lack of conformity of the radio equipment.
(2) Where another Member State has initiated the procedure under Article 40 of the Directive (as amended from time to time), the Secretary of State must, without delay, inform the European Commission and the other Member States of-
(a)any measure taken by an enforcing authority in respect of the radio equipment,
(b)any additional information which an enforcing authority has at its disposal relating to the lack of conformity of the radio equipment, and
(c)any objections that the Secretary of State may have to any measure taken by the Member State initiating the procedure.
(3) Where a measure taken by another Member State in respect of radio equipment is deemed justified under Article 40(7) of the Directive (as amended from time to time) (no objections raised by Member States or the European Commission in respect of a provisional measure taken by an enforcing authority), the market surveillance authority must ensure that appropriate measures, such as withdrawal or recall, are taken in respect of the radio equipment without delay.
(4) Where a measure taken by another Member State in respect of radio equipment is considered justified by the European Commission under Article 41(1) of the Directive (as amended from time to time) (consideration by the European Commission of objections raised by a Member State about, or compatibility with EU law of, measures taken by an economic operator, or a provisional measure taken by an enforcing authority), the market surveillance authority must take the necessary measures to ensure that the radio equipment is withdrawn or recalled from the United Kingdom market.
(5) Where the market surveillance authority is not the Secretary of State and the market surveillance authority has taken action under paragraph (3) or (4), it must inform the Secretary of State.
(6) Where the Secretary of State receives notification under paragraph (5) or has taken action under paragraphs (3) or (4), the Secretary of State must inform the European Commission of the action taken.
(7) If a measure taken by an enforcing authority under regulation 60 (enforcement action in respect of radio equipment which is not in conformity and which presents a risk) is considered unjustified by the European Commission under Article 41(1) of the Directive (as amended from time to time), the enforcing authority must withdraw that measure.
62.-(1) Where, having carried out an evaluation under regulation 59 (evaluation of radio equipment presenting a risk), an enforcing authority finds that although the radio equipment is in conformity with Part 2, it presents a risk, the enforcing authority must require a relevant economic operator to take appropriate measures to-
(a)ensure that the radio equipment, when placed on the market, no longer presents a risk,
(b)withdraw the radio equipment within a prescribed period, or
(c)recall the radio equipment within a prescribed period.
(2) Where an enforcing authority is not the Secretary of State and it takes measures under paragraph (1), it must notify the Secretary of State immediately.
(3) Where the Secretary of State receives notification under paragraph (2) or takes measures under paragraph (1), the Secretary of State must notify the European Commission and the other Member States immediately.
(4) The notifications referred to in paragraphs (2) and (3) must include details about the radio equipment and, in particular-
(a)the data necessary for the identification of the radio equipment concerned,
(b)the origin and the supply chain of the radio equipment,
(c)the nature of the risk involved, and
(d)the nature and duration of the measures taken by the enforcing authority.
(5) In this regulation, "prescribed period" means a period which is-
(a)prescribed by the enforcing authority, and
(b)reasonable and commensurate with the nature of the risk presented by the radio equipment.
63.-(1) Where an enforcing authority makes one of the following findings relating to radio equipment, it must require a relevant economic operator to put an end to the non-compliance within such reasonable period as the authority specifies-
(a)the CE marking-
(i)has not been affixed, or
(ii)has been affixed otherwise than in accordance with regulations 39 (prohibition on improper use of CE marking) and 44 (CE marking),
(b)where the conformity assessment procedure set out in Schedule 4 (full quality assurance) is applied, the identification number of the notified body-
(i)has not been affixed, or
(ii)has been affixed otherwise than in accordance with regulation 44 (CE marking),
(c)the EU declaration of conformity-
(i)has not been drawn up, or
(ii)has been drawn up otherwise than in accordance with regulations 10 (EU declaration of conformity and CE marking) and 42 (EU declaration of conformity),
(d)the technical documentation is either not available or not complete,
(e)the following information that is required to be included is absent, false or incomplete-
(i)the information specified in regulation 12(1) or (2) (identification of the radio equipment and manufacturer), or
(ii)the information specified in regulation 23(1) (information identifying importer),
(f)the information specified in regulation 13(1), (2) or (3) (instructions and information to be included with the radio equipment) is absent,
(g)the requirements set out in regulation 38 (identification of economic operators) on the identification of economic operators have not been met.
(2) Until the specified period has elapsed, the enforcing authority must not commence proceedings under these Regulations, or take any other enforcement action under these Regulations, against the relevant economic operator in respect of the non-compliance referred to in paragraph (1).
(3) Where the non-compliance referred to in paragraph (1) persists beyond the specified period, the enforcing authority must take appropriate measures to-
(a)restrict or prohibit corresponding radio equipment being made available on the market,
(b)ensure that the radio equipment is withdrawn, or
(c)ensure that the radio equipment is recalled.
(4) This regulation does not apply where radio equipment presents a risk.
64. When enforcing these Regulations, an enforcing authority must comply with the requirements of Article 21 of RAMS (as amended from time to time) in relation to any measure to-
(a)prohibit or restrict radio equipment being made available on the market,
(b)withdraw radio equipment, or
(c)recall radio equipment.
65.-(1) It is an offence for a person to contravene or fail to comply with any requirement of regulations 7 to 15, 16(4), 17 and 18, 20 to 28, 29(4), 30 to 34, 35(4).
(2) It is an offence for any person to contravene or fail to comply with any requirement of a withdrawal or recall notice served on that person by an enforcing authority under these Regulations.
66.-(1) Subject to paragraph (2), a person guilty of an offence under regulation 65 is liable on summary conviction-
(a)in England and Wales, to a fine or imprisonment for a term not exceeding 3 months or to both,
(b)in Scotland and Northern Ireland, to a fine not exceeding level 5 on the standard scale or imprisonment for a term not exceeding 3 months or to both.
(2) A person guilty of an offence under regulations 11, 16, 28 and 35 is liable on summary conviction-
(a)in England and Wales, to a fine,
(b)in Scotland and Northern Ireland, to a fine not exceeding level 5 on the standard scale.
67.-(1) Subject to paragraphs (2) and (4), in proceedings for an offence under regulation 65 (offences), it is a defence for a person ("P") to show that P took all reasonable steps and exercised all due diligence to avoid committing the offence.
(2) P may not rely on a defence under paragraph (1) which involves a third party allegation unless P has-
(a)served a notice in accordance with paragraph (3), or
(b)obtained the leave of the court.
(3) The notice must-
(a)give any information in P's possession which identifies or assists in identifying the person who-
(i)committed the act or default, or
(ii)supplied the information on which P relied.
(b)be served on the person bringing the proceedings not less than 7 clear days before-
(i)in England, Wales and Northern Ireland, the hearing of the proceedings,
(ii)in Scotland, the trial diet.
(4) P may not rely on a defence under paragraph (1) which involves an allegation that the commission of the offence was due to reliance on information supplied by another person unless it was reasonable for P to have relied upon the information, having regard in particular-
(a)to the steps that P took, and those which might reasonably have been taken, for the purpose of verifying the information, and
(b)to whether P had any reason to disbelieve the information.
(5) In this regulation, "third party allegation" means an allegation that the commission of the offence was due-
(a)to the act or default of another person, or
(b)to reliance on information supplied by another person.
68.-(1) Where the commission of an offence by one person ("A") under regulation 65 (offences) is due to anything which another person ("B") did or failed to do in the course of business, B is guilty of the offence and may be proceeded against and punished, whether or not proceedings are taken against A.
(2) Where a body corporate commits an offence, a relevant person is also guilty of the offence where the body corporate's offence was committed-
(a)with the consent or connivance of the relevant person, or
(b)as a result of the negligence of the relevant person.
(3) In paragraph (2), "relevant person" means-
(a)a director, manager, secretary or other similar officer of the body corporate,
(b)in relation to a body corporate managed by its members, a member of that body corporate performing managerial functions,
(c)in relation to a Scottish partnership, a partner, or
(d)a person purporting to act as a person described in sub-paragraphs (a), (b) or (c).
69.-(1) Subject to paragraph (4), in England and Wales an information relating to an offence under regulation 65 (offences) that is triable by a magistrates' court may be so tried if it is laid within 12 months after the date on which evidence sufficient in the opinion of the prosecutor to justify the proceedings comes to the knowledge of the prosecutor.
(2) Subject to paragraph (4), in Scotland-
(a)summary proceedings for an offence under regulation 65 may be commenced before the end of 12 months after the date on which evidence sufficient in the Lord Advocate's opinion to justify the proceedings came to the Lord Advocate's knowledge,
(b)section 136(3) of the Criminal Procedure (Scotland) Act 1995(16) (time limit for certain offences) applies for the purpose of this paragraph as it applies for the purpose of that section.
(3) Subject to paragraph (4), in Northern Ireland summary proceedings for an offence under regulation 65 may be instituted within 12 months after the date on which evidence sufficient in the opinion of the prosecutor to justify proceedings comes to the knowledge of the prosecutor.
(4) No proceedings may be brought more than 3 years after the commission of the offence.
(5) For the purposes of this regulation a certificate of the prosecutor (or in Scotland, the Lord Advocate) as to the date on which the evidence referred to in paragraphs (1), (2) or (3) came to light, is conclusive evidence.
70.-(1) Any document required or authorised by these Regulations to be served on a person may be served by-
(a)delivering it to that person in person,
(b)leaving it at that person's proper address, or
(c)sending it by post or electronic means to that person's proper address.
(2) In the case of a body corporate, a document may be served on a director of that body.
(3) In the case of a partnership, a document may be served on a partner or a person having control or management of the partnership business.
(4) For the purposes of this regulation, "proper address" means-
(a)in the case of a body corporate or its director-
(i)the registered or principal office of that body, or
(ii)the email address of the secretary or clerk of that body,
(b)in the case of a partnership, a partner or person having control or management of the partnership business-
(i)the principal office of the partnership, or
(ii)the email address of a partner or person having that control or management,
(c)in any other case, a person's last known address, which includes an email address.
(5) If a person to be served with a document has specified an address in the United Kingdom (other than that person's proper address) at which that person or someone on that person's behalf will accept service, that address must also be treated as that person's proper address.
(6) In this regulation, "partnership" includes a Scottish partnership.
71.-(1) This regulation applies where a person commits an offence under regulation 65 (offences).
(2) The court may (in addition to any other order it may make as to costs or expenses) order the person to reimburse the enforcing authority for any expenditure which the enforcing authority has incurred in investigating the offence.
72.-(1) An enforcing authority may itself take action which an economic operator could have been required to take by a notice served under these Regulations where the conditions for serving such a notice are met and either-
(a)the enforcing authority has been unable to identify any economic operator on whom to serve such a notice, or
(b)the economic operator on whom such a notice has been served has failed to comply with it.
(2) If the enforcing authority has taken action as a result of the condition in paragraph (1)(b) being met, the authority may recover from the economic operator, as a civil debt, any costs or expenses reasonably incurred by the enforcing authority in taking the action.
(3) A civil debt recoverable under paragraph (2) may be recovered summarily-
(a)in England and Wales by way of a complaint pursuant to section 58 of the Magistrates' Courts Act 1980(17),
(b)in Northern Ireland in proceedings under article 62 of the Magistrates' Court (Northern Ireland) Order 1981(18).
73.-(1) An application for an order to vary or set aside the terms of a notice served under these Regulations may be made-
(a)by the economic operator on whom the notice has been served,
(b)by a person having an interest in the radio equipment in respect of which the notice has been served, unless the notice is a recall notice.
(2) An application must be made before the end of the period of 21 days beginning with the day on which the notice was served.
(3) The appropriate court may only make an order setting aside a notice served under these Regulations if satisfied-
(a)that the requirements of these Regulations and of RAMS (in its application to radio equipment) have been complied with in respect of the radio equipment to which the notice relates, or
(b)that the enforcing authority failed to comply with regulation 58 (exercise of enforcement powers) when serving the notice.
(4) On an application to vary the terms of a notice served under these Regulations, the appropriate court may vary the terms of the notice as it considers appropriate.
(5) In this regulation-
(a)the "appropriate court" is to be determined in accordance with regulation 74 (appropriate court for appeals against notices),
(b)"notice" means any notice served in accordance with Schedule 10.
74.-(1) In England and Wales or Northern Ireland, the appropriate court for the purposes of regulation 73 (appeals against notices) is-
(a)the court in which proceedings have been brought in relation to the radio equipment for an offence under regulation 65 (offences),
(b)in any other case, a magistrates' court.
(2) In Scotland, the appropriate court for the purposes of regulation 73 is the sheriff of a sheriffdom in which the person making the appeal resides or has a registered or principal office.
(3) A person aggrieved by an order made by a magistrates' court in England and Wales or Northern Ireland pursuant to an application under regulation 73, or by a decision of such a court not to make such an order, may appeal against that order or decision-
(a)in England and Wales, to the Crown Court,
(b)in Northern Ireland, to the county court.
75.-(1) Where an enforcing authority serves a relevant notice in respect of radio equipment, the enforcing authority is liable to pay compensation to a person having an interest in the radio equipment for any loss or damage suffered by reason of the notice if both of the conditions in paragraph (2) are met.
(2) The conditions are that-
(a)the radio equipment in respect of which the relevant notice was served neither-
(i)presents a risk, nor
(ii)contravenes any requirements of these Regulations, and
(b)the exercise of the power to serve the relevant notice was not attributable to neglect or default by a relevant economic operator.
(3) In this regulation, "relevant notice" means a suspension, withdrawal or recall notice served in accordance with these Regulations.
76.-(1) The Secretary of State must from time to time-
(a)carry out a review of the regulatory provision contained in these Regulations, and
(b)publish a report setting out the conclusions of the review.
(2) The first report must be published before the end of the period of 5 years beginning with the commencement date.
(3) Subsequent reports must be published at intervals not exceeding 5 years.
(4) Section 30(3) of the Small Business, Enterprise and Employment Act 2015(19) requires that a review carried out under this regulation must, so far as is reasonable, have regard to how the Directive is implemented in other Member States.
(5) Section 30(4) of the Small Business, Enterprise and Employment Act 2015 requires that a report published under this regulation must, in particular-
(a)set out the objectives intended to be achieved by the regulatory provision referred to in paragraph 1(a),
(b)assess the extent to which those objectives are achieved,
(c)assess whether those objectives remain appropriate, and
(d)if those objectives remain appropriate, assess the extent to which they could be achieved in another way which involves less onerous regulatory provision.
(6) In this regulation, "regulatory provision" has the same meaning as in sections 28 to 32 of the Small Business, Enterprise and Employment Act 2015 (see section 32 of that Act).
77. Nothing in these Regulations prevents the making available on the market of radio equipment which-
(a)is in conformity with the requirements of Directive 1999/5/EC of the European Parliament and the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity(20), and
(b)is placed on the market on or before the commencement date.
78.-(1) Subject to paragraph (2), the Radio Equipment and Telecommunications Terminal Equipment Regulations 2000(21) are revoked.
(2) The Radio Equipment and Telecommunications Terminal Equipment Regulations 2000 continue to apply to any equipment placed on the market in accordance with those Regulations before the commencement date.
(3) In relation to radio equipment placed on the market before the commencement date, the amendments in regulations 79 and 80 do not apply.
79.-(1) The Enterprise Act 2002 (Part 9 Restrictions on Disclosure of Information) (Specification) Order 2004(22) is amended as follows.
(2) In Schedule 1, for "Radio Equipment and Telecommunications Terminal Equipment Regulations 2000" substitute "Radio Equipment Regulations 2017".
80.-(1) The Consumer Rights Act 2015(23) is amended as follows.
(2) In paragraph 10 of Schedule 5-
(a)omit the entry "paragraph 1(1)(b) or (2)(b) or 2 of Schedule 9 to the Radio Equipment and Telecommunications Terminal Equipment Regulations 2000 (SI 2000/730)", and
(b)at the appropriate place insert-
"regulation 56(1)(a)(ii) or (b)(ii) or (2) of the Radio Equipment Regulations 2017 (S.I. 2017/1206)".
81.-(1) The Electromagnetic Compatibility Regulations 2016(24) are amended as follows.
(2) In regulation 2 (interpretation)-
(a)in paragraph (1), omit the definition of "notified body", and
(b)after paragraph (4), insert-
"(5) In these Regulations (except Part 4 (notification of conformity assessment bodies) and Schedules 5 (requirements for notified bodies) and 6 (operational obligations of notified bodies)), "notified body" means-
(a)a notified body within the meaning set out in regulation 43 (notified bodies), or
(b)a notified body under the laws of any other Member State which implements the Directive.".
(3) In regulation 52 (designation of enforcing authorities) omit paragraph (4).
82.-(1) The Pressure Equipment (Safety) Regulations 2016(25) are amended as follows.
(2) In regulation 2 (interpretation)-
(a)in paragraph (1)-
(i)for the definition of "authorised representative" substitute-
""authorised representative" means a person established within the EU appointed in accordance with regulation 19(1) (manufacturer's authorised representative);",
(ii)omit the definition of "notified body", and
(b)after paragraph (6), insert-
"(7) In these Regulations (except Part 4 (notification of conformity assessment bodies) and Schedules 4 (notified body requirements) and 6 (operational obligations of notified bodies, recognised third party organisations and user inspectorates)), "notified body" means-
(a)a notified body within the meaning set out in regulation 51 (notified bodies), or
(b)a notified body under the laws of any other Member State which implement the Directive.".
83.-(1) The Simple Pressure Vessels (Safety) Regulations 2016(26) are amended as follows.
(2) In regulation 2 (interpretation)-
(a)in paragraph (4), omit the definition of "notified body", and
(b)after paragraph (6), insert-
"(7) In these Regulations (except Part 4 (notification of conformity assessment bodies) and Schedule 4 (notified bodies), "notified body" means-
(a)a notified body within the meaning set out in regulation 45 (notified bodies), or
(b)a notified body under the laws of any other Member State which implements the Directive.".
84.-(1) The Electrical Equipment (Safety) Regulations 2016(27) are amended as follows.
(2) In paragraph (1) of regulation 2, for the definition of "authorised representative" substitute-
""authorised representative" means a person established within the EU appointed in accordance with regulation 14 (manufacturer's authorised representatives);".
(3) In paragraph (3) of regulation 3, for "apparatus covered by the Radio Equipment and Telecommunications Terminal Equipment Regulations 2000" substitute "equipment covered by the Radio Equipment Regulations 2017".
(4) In regulation 29 (duty to take action in respect of electrical equipment placed on the market which is not considered to be in conformity)-
(a)in the title of the regulation, for "placed" substitute "made available",
(b)in paragraph (1), for "placed" substitute "made available".
85.-(1) The Recreational Craft Regulations 2017(28) are amended as follows.
(2) In regulation 29 (duty not to place a product on the market where the distributor suspects that it is not in conformity)-
(a)in the title of the regulation, for "place a product" substitute "make a product available",
(b)in paragraph (1), for "place the product" substitute "make the product available".
Margot James
Minister for Small Business, Consumer and corporate Responsibility
Department for Business, Energy & Industrial Strategy
4th December 2017
Regulation 3(2)(b)
1.-(1) Radio equipment used by radio amateurs within the meaning of Article 1, definition 56, of the International Telecommunications Union (ITU) Radio Regulations(29), unless the equipment is made available on the market.
(2) The following must be regarded as not being made available on the market-
(a)radio kits for assembly and use by radio amateurs,
(b)radio equipment modified by and for the use of radio amateurs, and
(c)equipment constructed by individual radio amateurs for experimental and scientific purposes related to amateur radio.
2. Marine equipment falling within the scope of Council Directive 96/98/EC on marine equipment(30).
3. Airborne products, parts and appliances falling within the scope of Article 3 of Regulation (EC) No 216/2008 of the European Parliament and of the Council on common rules in the field of civil aviation and establishing a European Aviation Safety Agency(31).
4. Custom-built evaluation kits destined for professionals to be used solely at research and development facilities for such purposes.
Regulation 41(4)(a)
1. Internal production control is the conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in paragraphs 2, 3 and 4 and ensures and declares on his sole responsibility that the radio equipment concerned satisfies the essential requirements.
2. The manufacturer must establish the technical documentation in accordance with regulation 45 (technical documentation).
3. The manufacturer must take all measures necessary so that the manufacturing process and its monitoring ensure compliance of the manufactured radio equipment with the technical documentation referred to in paragraph 2 and with the essential requirements.
4.-(1) The manufacturer must affix the CE marking in accordance with regulations 39 (prohibition on improper use of CE marking) and 44 (CE marking) to each item of radio equipment that satisfies the applicable requirements of these Regulations.
(2) The manufacturer must draw up a written EU declaration of conformity for each radio equipment type and keep it together with the technical documentation at the disposal of the national authorities for 10 years after the radio equipment has been placed on the market. The EU declaration of conformity must identify the radio equipment for which it has been drawn up.
(3) A copy of the EU declaration of conformity must be made available to the relevant authorities upon request.
5. The manufacturer's obligations set out in paragraph 4 may be fulfilled by the manufacturer's authorised representative, on the manufacturer's behalf and under the manufacturer's responsibility, provided that they are specified in the mandate.
Regulation 41(4)(b)
When reference is made to this Schedule, the conformity assessment procedure must follow Modules B (EU-type examination) and C (Conformity to type based on internal production control) of this Schedule.
1. EU-type examination is the part of a conformity assessment procedure in which a notified body examines the technical design of the radio equipment and verifies and attests that the technical design of the radio equipment meets the essential requirements.
2. EU-type examination must be carried out by assessment of the adequacy of the technical design of the radio equipment through examination of the technical documentation and supporting evidence referred to in paragraph 3, without examination of a specimen (design type).
3.-(1) The manufacturer must lodge an application for EU-type examination with a single notified body of the manufacturer's choice.
(2) The application must include:
(a)the name and address of the manufacturer and, if the application is lodged by the authorised representative, the representative's name and address as well;
(b)a written declaration that the same application has not been lodged with any other notified body;
(c)the technical documentation. The technical documentation shall make it possible to assess the radio equipment's conformity with the applicable requirements of these Regulations and must include an adequate analysis and assessment of the risk(s). The technical documentation must specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and operation of the radio equipment. The technical documentation must contain, wherever applicable, the elements set out in Schedule 5 (contents of technical documentation);
(d)the supporting evidence for the adequacy of the technical design solution. That supporting evidence must mention any documents that have been used, in particular where the relevant harmonised standards have not been applied or have not been fully applied. The supporting evidence must include, where necessary, the results of tests carried out in accordance with other relevant technical specifications by the appropriate laboratory of the manufacturer, or by another testing laboratory on the manufacturer's behalf and under the manufacturer's responsibility.
4. The notified body must examine the technical documentation and supporting evidence to assess the adequacy of the technical design of the radio equipment.
5. The notified body must draw up an evaluation report that records the activities undertaken in accordance with paragraph 4 and their outcomes. Without prejudice to its obligations as provided in paragraph 8, the notified body must release the content of that report, in full or in part, only with the agreement of the manufacturer.
6.-(1) Where the type meets the requirements of these Regulations that apply to the radio equipment concerned, the notified body must issue an EU-type examination certificate to the manufacturer. That certificate must contain-
(a)the name and address of the manufacturer,
(b)the conclusions of the examination,
(c)the aspects of the essential requirements covered by the examination,
(d)the conditions (if any) for its validity, and
(e)the necessary data for identification of the assessed type.
(2) The EU-type examination certificate may have one or more annexes attached.
(3) The EU-type examination certificate and its annexes must contain all relevant information to allow the conformity of manufactured radio equipment with the examined type to be evaluated and to allow for in-service control.
(4) Where the type does not satisfy the applicable requirements of these Regulations, the notified body must refuse to issue an EU-type examination certificate and must inform the applicant accordingly, giving detailed reasons for its refusal.
7.-(1) The notified body must keep itself appraised of any changes in the generally acknowledged state of the art which indicate that the approved type may no longer comply with the applicable requirements of these Regulations, and must determine whether such changes require further investigation. If so, the notified body must inform the manufacturer accordingly.
(2) The manufacturer must inform the notified body that holds the technical documentation relating to the EU-type examination certificate of all modifications to the approved type that may affect the conformity of the radio equipment with the essential requirements of these Regulations or the conditions for validity of that certificate. Such modifications require additional approval in the form of an addition to the original EU-type examination certificate.
8.-(1) Each notified body must inform its notifying authority concerning the EU-type examination certificates and/or any additions thereto which it has issued or withdrawn, and must, periodically or upon request, make available to its notifying authority the list of such certificates and/or any additions thereto refused, suspended or otherwise restricted.
(2) Each notified body must inform the other notified bodies concerning the EU-type examination certificates and/or any additions thereto which it has refused, withdrawn, suspended or otherwise restricted, and, upon request, concerning such certificates and/or additions thereto which it has issued.
(3) Each notified body must inform the Member States of EU-type examination certificates it has issued and/or additions thereto in those cases where harmonised standards the references of which have been published in the Official Journal have not been applied or not been fully applied. The Member States, the European Commission and the other notified bodies may, on request, obtain a copy of the EU-type examination certificates and/or additions thereto. On request, the Member States and the European Commission may obtain a copy of the technical documentation and the results of the examinations carried out by the notified body. The notified body must keep a copy of the EU-type examination certificate, its annexes and additions, as well as the technical file including the documentation submitted by the manufacturer for 10 years after the radio equipment has been assessed or until the expiry of the validity of that certificate.
9. The manufacturer must keep a copy of the EU-type examination certificate, its annexes and additions together with the technical documentation at the disposal of the national authorities for 10 years after the radio equipment has been placed on the market.
10. The manufacturer's authorised representative may lodge the application referred to in paragraph 3 and fulfil the obligations set out in paragraphs 7 and 9, provided that they are specified in the mandate.
11. Conformity to type based on internal production control is the part of a conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in paragraphs 2 and 3, and ensures and declares that the radio equipment concerned is in conformity with the type described in the EU-type examination certificate and satisfies the requirements of these Regulations that apply to it.
12. The manufacturer must take all measures necessary so that the manufacturing process and its monitoring ensure conformity of the manufactured radio equipment with the approved type described in the EU-type examination certificate and with the requirements of these Regulations that apply to it.
13.-(1) The manufacturer must affix the CE marking in accordance with regulations 39 (prohibition on improper use of CE marking) and 44 (CE marking) to each item of radio equipment that is in conformity with the type described in the EU-type examination certificate and satisfies the applicable requirements of these Regulations.
(2) The manufacturer must draw up a written EU declaration of conformity for each radio equipment type and keep it at the disposal of the national authorities for 10 years after the radio equipment has been placed on the market. The EU declaration of conformity must identify the radio equipment type for which it has been drawn up.
(3) A copy of the EU declaration of conformity must be made available to the relevant authorities upon request.
14. The manufacturer's obligations set out in paragraph 3 may be fulfilled by the manufacturer's authorised representative, on the manufacturer's behalf and under the manufacturer's responsibility, provided that they are specified in the mandate.
Regulation 41(4)(c)
1. Conformity based on full quality assurance is the conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in paragraphs 2 and 5 and ensures and declares the manufacturer's sole responsibility that the radio equipment concerned satisfies the requirements of these Regulations that apply to it.
2. The manufacturer must operate an approved quality system for design, manufacture, final radio equipment inspection and testing of the radio equipment concerned as specified in paragraph 3 and must be subject to surveillance as specified in paragraph 4.
3.-(1) The manufacturer must lodge an application for assessment of the manufacturer's quality system with the notified body of the manufacturer's choice, for the radio equipment concerned. The application must include-
(a)the name and address of the manufacturer and, if the application is lodged by the authorised representative, the representative's name and address as well,
(b)the technical documentation for each radio equipment type intended to be manufactured. The technical documentation must contain, wherever applicable, the elements set out in Schedule 5 (contents of technical documentation),
(c)the documentation concerning the quality system, and
(d)a written declaration that the same application has not been lodged with any other notified body.
(2) The quality system must ensure compliance of the radio equipment with the requirements of these Regulations that apply to it. All the elements, requirements and provisions adopted by the manufacturer must be documented in a systematic and orderly manner in the form of written policies, procedures and instructions. That quality system documentation must permit a consistent interpretation of the quality programmes, plans, manuals and records. It must, in particular, contain an adequate description of-
(a)the quality objectives and the organisational structure, responsibilities and powers of the management with regard to design and product quality;
(b)the technical design specifications, including standards, that will be applied and, where the relevant harmonised standards will not be applied in full, the means that will be used to ensure that the essential requirements of these Regulations that apply to the radio equipment will be met;
(c)the design control and design verification techniques, processes and systematic actions that will be used when designing radio equipment pertaining to the radio equipment type covered;
(d)the corresponding manufacturing, quality control and quality assurance techniques, processes and systematic actions that will be used;
(e)the examinations and tests that will be carried out before, during and after manufacture, and the frequency with which they will be carried out;
(f)the quality records, such as inspection reports and test data, calibration data, reports concerning the qualifications of the personnel, etc.;
(g)the means of monitoring the achievement of the required design and product quality and the effective operation of the quality system.
(3) The notified body must-
(a)assess the quality system to determine whether it satisfies the requirements referred to in paragraph 3(2), and
(b)presume conformity with those requirements in respect of the elements of the quality system that comply with the corresponding specifications of the relevant harmonised standard.
(4) In addition to experience in quality management systems, the auditing team must-
(a)have at least one member experienced as an assessor in the relevant radio equipment field and radio equipment technology concerned, and knowledge of the applicable requirements of these Regulations, and
(b)review the technical documentation referred to in paragraph 3(1)(b) to verify the manufacturer's ability to identify the applicable requirements of these Regulations and to carry out the necessary examinations with a view to ensuring compliance of the radio equipment with those requirements.
(5) The audit must include an assessment visit to the manufacturer's premises.
(6) The manufacturer or the manufacturer's authorised representative must be notified of the decision.
(7) The notification must contain the conclusions of the audit and the reasoned assessment decision.
(8) The manufacturer must undertake to fulfil the obligations arising out of the quality system as approved and to maintain it so that it remains adequate and efficient.
(9) The manufacturer must keep the notified body that has approved the quality system informed of any intended change to the quality system. The notified body must evaluate any proposed changes and decide whether the modified quality system will continue to satisfy the requirements referred to in paragraph 3(2) or whether a reassessment is necessary. The notified body must notify the manufacturer of its decision. The notification must contain the conclusions of the examination and the reasoned assessment decision.
4.-(1) The purpose of surveillance is to make sure that the manufacturer duly fulfils the obligations arising out of the approved quality system.
(2) The manufacturer must, for assessment purposes, allow the notified body access to the design, manufacture, inspection, testing and storage sites, and must provide it with all necessary information, in particular-
(a)the quality system documentation;
(b)the quality records as provided for by the design part of the quality system, such as results of analyses, calculations, tests, etc;
(c)the quality records as provided for by the manufacturing part of the quality system, such as inspection reports and test data, calibration data, reports concerning the qualifications of the personnel, etc.
(3) The notified body must carry out periodic audits to make sure that the manufacturer maintains and applies the quality system and must provide the manufacturer with an audit report.
(4) In addition, the notified body may pay unexpected visits to the manufacturer. During such visits, the notified body may, if necessary, carry out radio equipment tests, or have them carried out, in order to check the proper functioning of the quality system. It must provide the manufacturer with a visit report and, if tests have been carried out, with a test report.
5.-(1) The manufacturer must affix the CE marking in accordance with regulations 39 (prohibition on improper use of CE marking) and 44 (CE marking) and, under the responsibility of the notified body referred to in paragraph 3(1), the latter's identification number to each item of radio equipment that satisfies the requirements of these Regulations.
(2) The manufacturer must draw up a written EU declaration of conformity for each radio equipment type and keep it at the disposal of the national authorities for 10 years after the radio equipment has been placed on the market. The EU declaration of conformity must identify the radio equipment type for which it has been drawn up. A copy of the EU declaration of conformity must be made available to the relevant authorities upon request.
6. The manufacturer must, for a period ending 10 years after the radio equipment has been placed on the market, keep at the disposal of the national authorities-
(a)the technical documentation referred to in paragraph 3(1);
(b)the documentation concerning the quality system referred to in paragraph 3(1);
(c)the change referred to in paragraph 3(9), as approved;
(d)the decisions and reports of the notified body referred to in paragraphs 3(9), 4(3) and 4(4).
7.-(1) Each notified body must inform its notifying authority of quality system approvals which it has issued or withdrawn, and must, periodically or upon request, make available to its notifying authority the list of quality system approvals refused, suspended or otherwise restricted.
(2) Each notified body must inform the other notified bodies of quality system approvals which it has refused, suspended or withdrawn, and, upon request, of quality system approvals which it has issued.
8. The manufacturer's obligations set out in paragraphs 3(1) and (9), 5 and 6 may be fulfilled by the manufacturer's authorised representative, on the manufacturer's behalf and under the manufacturer's responsibility, provided that they are specified in the mandate.
Regulation 45(2)(a)
1. The technical documentation must, wherever applicable, contain at least the following elements-
(a)a general description of the radio equipment including-
(i)photographs or illustrations showing external features, marking and internal layout;
(ii)versions of software or firmware affecting conformity with the essential requirements;
(iii)user information and installation instructions;
(b)conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits and other relevant similar elements;
(c)descriptions and explanations necessary for the understanding of those drawings and schemes and the operation of the radio equipment;
(d)a list of the harmonised standards applied in full or in part the references of which have been published in the Official Journal, and, where those harmonised standards have not been applied, descriptions of the solutions adopted to meet the essential requirements, including a list of other relevant technical specifications applied. In the event of partly applied harmonised standards, the technical documentation must specify the parts which have been applied;
(e)copy of the EU declaration of conformity;
(f)where the conformity assessment module in Schedule 3 (EU-type examination and conformity to type based on internal production control) has been applied, copy of the EU-type examination certificate and its annexes as delivered by the notified body involved;
(g)results of design calculations made, examinations carried out, and other relevant similar elements;
(h)test reports;
(i)an explanation of the compliance with the requirement of regulation 8 (construction must allow operation in at least one Member State) and of the inclusion or not of information on the packaging in accordance with regulation 14 (information to be included where there are restrictions on putting into service or requirements for authorisation of use).
Regulation 42(b)
1. Radio equipment (product, type, batch or serial number):
2. Name and address of the manufacturer or his authorised representative:
3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Object of the declaration (identification of the radio equipment allowing traceability; it may include a colour image of sufficient clarity where necessary for the identification of the radio equipment):
5. The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
Other Union harmonisation legislation where applicable
6. References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared. References must be listed with their identification number and version and, where applicable, date of issue:
7. Where applicable, the notified body (name, number) performed (description of intervention) and issued the EU-type examination certificate:
8. Where applicable, description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformity:
Additional information:
Signed for and on behalf of:
(place and date of issue):
(name, function) (signature):
Regulation 43(1)
1. The simplified EU declaration of conformity referred to in regulation 13(3) (instructions and information to be included with the radio equipment) must be provided as follows-
2. Hereby, [Name of manufacturer] declares that the radio equipment type [designation of type of radio equipment] is in compliance with Directive 2014/53/EU.
3. The full text of the EU declaration of conformity is available at the following internet address:
Regulation 2(1)
1. A conformity assessment body must be established in the United Kingdom and have legal personality.
2.-(1) A conformity assessment body must be a third-party body independent of the organisation or the radio equipment it assesses.
(2) A body belonging to a business association or professional federation representing undertakings involved in the design, manufacturing, provision, assembly, use or maintenance of radio equipment which it assesses may, on condition that its independence and the absence of any conflict of interest are demonstrated, be considered to satisfy sub-paragraph (1).
3.-(1) A conformity assessment body, its top level management and the personnel responsible for carrying out the conformity assessment activities must not be the designer, manufacturer, supplier, installer, purchaser, owner, user or maintainer of the radio equipment it assesses nor the representative of any of those parties.
(2) Sub-paragraph (1) does not preclude the use of assessed radio equipment that is necessary for the operations of the conformity assessment body or the use of such radio equipment for personal purposes.
4. A conformity assessment body, its top level management and the personnel responsible for carrying out the conformity assessment activities must not be directly involved in the design, manufacture or construction, marketing, installation, use or maintenance of the radio equipment it assesses nor represent parties engaged in those activities.
5. A conformity assessment body, its top level management and the personnel responsible for carrying out the conformity assessment activities must not engage in any activity, including consultancy services, that may conflict with their independence of judgment or integrity in relation to conformity assessment activities for which they are notified.
6. A conformity assessment body must ensure that the activities of its subsidiaries or subcontractors do not affect the confidentiality, objectivity or impartiality of their conformity assessment activities.
7. A conformity assessment body and its personnel must carry out the conformity assessment activities with the highest degree of professional integrity and the requisite technical competence in the specific field and must be free from all pressures and inducements, particularly financial, which might influence their judgment or the results of their conformity assessment activities, especially as regards persons or groups of persons with an interest in the results of those activities.
8. A conformity assessment body must be capable of carrying out all of the conformity assessment activities in relation to which it has been, or is to be, notified, whether those activities are carried out by the conformity assessment body itself or on its behalf and under its responsibility.
9. A conformity assessment body must have at its disposal-
(a)personnel with technical knowledge and sufficient and appropriate experience to perform the conformity assessment activities;
(b)descriptions of procedures in accordance with which conformity assessment is carried out ensuring the transparency and ability of reproduction of those procedures;
(c)policies and procedures in place to distinguish between activities that it carries out as a notified body and other activities;
(d)procedures for the performance of activities which take due account of the size of an undertaking, the sector in which it operates, its structure, the degree of complexity of the technology of the radio equipment in question and the mass or serial nature of the production process.
10. A conformity assessment body must have the means necessary to perform the technical and administrative tasks connected with the conformity assessment activities in an appropriate manner and must have access to the necessary equipment and facilities to perform these activities.
11. The personnel responsible for carrying out the conformity assessment activities must have-
(a)sound technical and vocational training covering all the conformity assessment activities in relation to which the conformity assessment body has been notified;
(b)satisfactory knowledge of the requirements of the assessments that they carry out and adequate authority to carry out those assessments;
(c)appropriate knowledge and understanding of the essential requirements, the applicable harmonised standards, the Directive and these Regulations;
(d)the ability to draw up EU-type examination certificates or quality system approvals, records and reports demonstrating that assessments have been carried out.
12. A conformity assessment body must be able to demonstrate the impartiality of its top level management and the personnel responsible for carrying out the conformity assessment activities.
13. The remuneration of the top level management and the personnel responsible for carrying out the conformity assessment activities must not depend on the number of assessments carried out or on the results of those assessments.
14. A conformity assessment body must have, and must satisfy the Secretary of State that it has, adequate civil liability insurance in respect of its activities.
15. A conformity assessment body must ensure that its personnel observe professional secrecy with regard to all information obtained in carrying out their tasks in accordance with these Regulations and that proprietary rights are protected.
16. Paragraph 15 does not prevent the personnel from providing information to the Secretary of State or an enforcing authority.
17. A conformity assessment body must participate in, or ensure that its personnel who are responsible for carrying out the conformity assessment activities are informed of, the relevant standardisation activities and the activities of any notified body coordination group established under the Directive and must apply as general guidance the administrative decisions and documents produced as a result of the work of that group.
Regulation 53
1. A notified body must carry out conformity assessments in accordance with the relevant conformity assessment procedures in Schedule 3 (conformity assessment concerning EU-type examination) or Schedule 4 (conformity assessment concerning quality system approval).
2. A notified body must carry out conformity assessments in a proportionate manner, avoiding unnecessary burdens on economic operators.
3. A conformity assessment body must perform its activities taking due account of the size of an undertaking, the sector in which it operates, its structure, the degree of complexity of the radio equipment technology in question and the mass or serial nature of the production process.
4. A conformity assessment body must respect the degree of rigour and the level of protection required to ensure that the radio equipment is in conformity with the requirements of these Regulations.
5. Where a notified body finds that the essential requirements or the corresponding harmonised standards have not been met by the manufacturer, that body must require that manufacturer to take appropriate corrective measures and must not issue an EU-type examination certificate or quality system approval until the appropriate corrective measures have been taken.
6. Where, in the course of the monitoring of conformity following the issue of an EU-type examination certificate or a quality system approval, a notified body finds that the radio equipment is no longer in conformity with the essential requirements, it must require the manufacturer to take appropriate corrective measures and must suspend or withdraw the EU-type examination certificate or quality system approval (if necessary).
7. Where the notified body has required a manufacturer to take corrective measures and the manufacturer has failed to take such measures, or those measures have not had the required effect, the notified body must restrict, suspend or withdraw any EU-type examination certificates or quality system approvals as appropriate.
8. Paragraph 9 applies where a notified body is minded to-
(a)refuse to issue an EU-type examination certificate,
(b)refuse to grant a quality system approval, or
(c)restrict, suspend or withdraw an EU-type examination certificate or quality system approval.
9. Where this paragraph applies, the notified body must-
(a)give the person applying for the EU-type examination certificate or quality system approval, or the person to whom the EU-type examination certificate or quality system approval was given-
(i)a notice in writing giving reasons and specifying the date on which the refusal, restriction, suspension or withdrawal is intended to take effect, and
(ii)an opportunity to make representations within a reasonable period from the date of the notice, and
(b)take account of any representations made under sub-paragraph (a)(ii) before taking its decision.
10. A notified body must inform the Secretary of State of-
(a)any refusal, restriction, suspension or withdrawal of an EU-type examination certificate or quality system approval in accordance with the requirements of Schedule 3 or Schedule 4 as appropriate,
(b)any circumstances affecting the scope of, or conditions for, notification under regulation 47 (notification),
(c)any request for information which it has received from an enforcing authority or a competent national authority of another Member State regarding conformity assessment activities, and
(d)on request, conformity assessment activities performed within the scope of its notification under regulation 47 and any other activity performed, including cross-border activities and subcontracting.
11. A notified body must make provision in its contracts with its clients enabling such clients to appeal against a decision-
(a)to refuse to issue an EU-type examination certificate or quality system approval decision, or
(b)to restrict, suspend or withdraw an EU-type examination certificate or quality system approval decision.
12. A notified body must, in accordance with the requirements in Schedule 3 and Schedule 4, provide other bodies notified under the Directive carrying out similar conformity assessment activities covering the same type of radio equipment with relevant information on issues relating to negative and, on request, positive conformity assessment results.
13. A notified body must participate in the work of any notified body coordination group established under the Directive, directly or by means of its designated representatives.
14. A notified body must fulfil any information obligations under Schedules 3 and 4.
Regulation 55(3), 57(1)
1. For the purposes of enforcing these Regulations, the following sections of the 1987 Act apply subject to the modifications in paragraph 2-
(a)section 13 (prohibition notices and notices to warn),
(b)section 14 (suspension notices),
(c)section 16 (forfeiture: England, Wales and Northern Ireland),
(d)section 17 (forfeiture: Scotland),
(e)section 18 (power to obtain information),
(f)section 29 (powers of search etc),
(g)section 30 (provisions supplemental to s 29),
(h)section 31 (power of customs officer to detain goods),
(i)section 33 (appeals against detention of goods),
(j)section 34 (compensation for seizure and detention),
(k)section 35 (recovery of expenses of enforcement),
(l)section 37 (power of Commissioners for Revenue and Customs to disclose information)),
(m)section 45 (interpretation),
(n)section 46(1) (meaning of "supply"), and
(o)Schedule 2 (prohibition notices and notices to warn).
2. The sections of the 1987 Act referred to in paragraph 1 are to apply as if-
(a)in section 13-
(i)in subsection (1), "relevant" were omitted on each occasion that it appears,
(ii)for "unsafe", on each occasion that it appears, there were substituted "non-compliant",
(iii)in subsection (2), the words from "; and the Secretary of State may" to the end were omitted, and
(iv)subsections (4) to (7) were omitted;
(b)in section 14-
(i)in subsection (1), after "any safety provision has been contravened in relation to any goods", there were inserted "or that such goods present a risk",
(ii)in subsection 2(b), after "a safety provision has been contravened in relation to the goods", there were inserted "or that such goods present a risk",
(iii)in subsection (2)(c), "under section 15 below" were omitted, and
(iv)subsections (6) to (8) were omitted;
(c)in section 16-
(i)in subsection (1), after "a contravention in relation to the goods of a safety provision", there were inserted "or that such goods present a risk",
(ii)for subsection 2(b) there were substituted-
"(b)where an application with respect to some or all of the goods has been made to a magistrates' court under regulation 73 (appeals against notices) of the 2017 Regulations or section 33, to that court; and",
(iii)in subsection (3), after "a contravention in relation to the goods of a safety provision", there were inserted "or that such goods present a risk",
(iv)after subsection (4), there were inserted-
"(4A) A court may infer for the purposes of this section that any goods present a risk, if it is satisfied that such a risk is presented by goods which are representative of those goods (whether by reason of being of the same design or part of the same consignment or batch or otherwise).",
(v)in subsection (6), the words "Subject to subsection (7) below," were omitted, and
(vi)subsection (7) were omitted;
(d)in section 17-
(i)in subsection (1), after "a contravention of a safety provision", there were inserted "or where the goods present a risk",
(ii)in subsection (6), after "a contravention in relation to those goods of a safety provision", there were inserted "or that those goods present a risk", and
(iii)after subsection (7), there were inserted-
"(7A) The sheriff may infer for the purposes of this section that any goods present a risk, if the sheriff is satisfied that such a risk is presented by goods which are representative of those goods (whether by reason of being of the same design or part of the same consignment or batch or otherwise).";
(e)in section 18, subsections (3) and (4) were omitted;
(f)in section 29-
(i)in subsection 4(a), after "any contravention of any safety provision in relation to the goods", there were inserted "or whether the goods present a risk"; and
(ii)in subsection 4(b), after "any such contravention", there were inserted "or whether the goods present a risk";
(g)in section 30-
(i)at the end of subsection (2)(a)(ii), for "and" there were substituted "or",
(ii)after subsection (2)(a)(ii), there were inserted-
"(iii)that any goods which any officer has power to inspect under section 29 are on any premises and their inspection is likely to demonstrate that they present a risk; and", and
(iii)subsections (5), (7) and (8) were omitted;
(h)in section 31(1), for "Part II of this Act", there were substituted "the 2017 Regulations",
(i)in section 34-
(i)omit the word "and" at the end of subsection (1)(a), and
(ii)after that subsection, insert-
"(aa)the goods do not present a risk; and",
(j)in section 37(1), for "Part II of this Act", there were substituted "the 2017 Regulations",
(k)in section 45(1)-
(i)the definitions of "conditional sale agreement", "gas", "motor vehicle", "personal injury", "subordinate legislation" and "substance" were omitted,
(ii)before the definition of "aircraft", there were inserted-
""the 2017 Regulations" means the Radio Equipment Regulations 2017;",
(iii)for the definition of "enforcement authority" there were substituted-
""enforcement authority" means an enforcing authority as defined in regulation 2(1) of the 2017 Regulations;",
(iv)for the definition of "goods" there were substituted-
""goods" means radio equipment within the scope of the 2017 Regulations;",
(v)after the definition of "motor vehicle", there were inserted-
""non-compliant" in relation to any goods means that-
a safety provision has been contravened in relation to the goods; or
the goods present a risk",
(vi)after the definition of " premises" there were inserted-
""present a risk" means present a risk where "risk" has the meaning set out in regulation 2(5) of the 2017 Regulations;",
(vii)for the definition of "safety provision" there were substituted-
""safety provision" means any provision of the 2017 Regulations;", and
(viii)for the definition of "safety regulations" there were inserted-
""safety regulations" means the 2017 Regulations;",
(l)in section 46(1), there were omitted from "and, in relation to gas or water" to the end; and
(m)in Schedule 2-
(i)for "unsafe", on each occasion that it appears, there were substituted "non-compliant", and
(ii)for "safe", on each occasion that it appears, there were substituted "not non-compliant".
3. Schedule 5 to the Consumer Rights Act 2015 (investigatory powers etc)(33) applies to OFCOM as if-
(a)OFCOM were a domestic enforcer within the meaning of that Schedule, and
(b)the enforcer's legislation within the meaning of that Schedule, in relation to OFCOM, were the legislation and notices which, by virtue of regulation 56(1)(a)(i) or (b)(i), OFCOM has a duty or power to enforce.
4.-(1) An enforcing authority may serve a compliance notice on a relevant economic operator in respect of radio equipment if the authority has reasonable grounds for believing that there is non-compliance.
(2) A compliance notice must-
(a)require the relevant economic operator on which it is served to-
(i)end the non-compliance within such period as may be specified in the notice, or
(ii)provide evidence, within such period as may be specified in the notice, demonstrating to the satisfaction of the enforcing authority that the non-compliance has not in fact occurred, and
(b)warn the economic operator that, if the non-compliance persists beyond, or if satisfactory evidence has not been produced within, the period specified in the notice, further action may be taken in respect of the radio equipment or any radio equipment of the same type made available on the market by that relevant economic operator.
(3) A compliance notice may include directions as to the measures to be taken by the economic operator to secure compliance, including different ways of securing compliance.
(4) Subject to sub-paragraph (5), an enforcing authority may revoke or vary a compliance notice by serving a notification on the economic operator.
(5) An enforcing authority may not vary a compliance notice so as to make it more restrictive for the economic operator or more onerous for the economic operator to comply.
5.-(1) An enforcing authority may serve a withdrawal notice on a relevant economic operator in respect of radio equipment if the authority has reasonable grounds for believing that-
(a)the radio equipment has been made available on the market, and
(b)there is non-compliance.
(2) A withdrawal notice must prohibit the relevant economic operator from making the radio equipment available on the market without the consent of the enforcing authority.
(3) A withdrawal notice may require the relevant economic operator to take action to alert end-users to any risk presented by the radio equipment.
(4) A withdrawal notice may require the relevant economic operator to keep the enforcing authority informed of the whereabouts of any radio equipment referred to in the notice.
(5) A consent given by the enforcing authority pursuant to a withdrawal notice may impose such conditions on the making available on the market of the radio equipment as the enforcing authority considers appropriate.
(6) Subject to sub-paragraph (7), an enforcing authority may revoke or vary a withdrawal notice by serving a notification on the economic operator.
(7) An enforcing authority may not vary a withdrawal notice so as to make it more restrictive for the economic operator or more onerous for the economic operator to comply.
(8) A withdrawal notice has effect throughout the United Kingdom.
6.-(1) The enforcing authority may serve a recall notice on a relevant economic operator in respect of radio equipment if the authority has reasonable grounds for believing that-
(a)the radio equipment has been made available to end-users, and
(b)there is non-compliance.
(2) A recall notice must require the relevant economic operator to use reasonable endeavours to organise the return of the radio equipment from end-users to the relevant economic operator or another person specified in the notice.
(3) A recall notice may-
(a)require the relevant economic operator to-
(i)contact end-users in order to inform them of the recall, to the extent that it is practicable to do so,
(ii)publish a notice in such form and such manner as is likely to bring to the attention of end-users any risk the radio equipment poses and the fact of the recall, or
(iii)make arrangements for the collection or return of the radio equipment from end-users or its disposal, or
(b)impose such additional requirements on the relevant economic operator as are reasonable and practicable with a view to achieving the return of the radio equipment.
(4) In determining what requirements to include in a recall notice, the enforcing authority must take into consideration the need to encourage distributors and end-users to contribute to its implementation.
(5) A recall notice may only be issued by the enforcing authority where-
(a)other action which it may require under these Regulations would not suffice to address the non-compliance,
(b)the action being undertaken by the relevant economic operator is unsatisfactory or insufficient to address the non-compliance,
(c)the enforcing authority has given not less than 10 days' notice to the relevant economic operator of its intention to serve such a notice, and
(d)the enforcing authority has taken account of any advice obtained under sub-paragraph (6).
(6) A relevant economic operator which has received notice from the enforcing authority of an intention to serve a recall notice may at any time prior to the service of the recall notice require the authority to seek the advice of such person as the Institute determines on the questions of-
(a)whether there is non-compliance, and
(b)whether the issue of a recall notice would be proportionate.
(7) Sub-paragraph (5)(b), (c) and (d) do not apply in the case of radio equipment presenting a serious risk requiring, in the view of the enforcing authority, urgent action.
(8) Where a relevant economic operator requires the enforcing authority to seek advice under sub-paragraph (6), that relevant economic operator is to be responsible for the fees, costs and expenses of the Institute and of the person appointed by the Institute to advise the enforcing authority.
(9) In this paragraph, "Institute" means the charitable organisation with registered number 803725 and known as the Chartered Institute of Arbitrators.
(10) A recall notice served by the enforcing authority may require the relevant economic operator to keep the authority informed of the whereabouts of radio equipment to which the recall notice relates, so far as the relevant economic operator is able to do so.
(11) Subject to sub-paragraph (12), an enforcing authority may revoke or vary a recall notice by serving a notification on the economic operator.
(12) An enforcing authority may not vary a recall notice so as to make it more restrictive for the economic operator or more onerous for the economic operator to comply.
(13) A recall notice has effect throughout the United Kingdom.
7. In this Schedule, "non-compliance" means that the radio equipment-
(a)presents a risk, or
(b)is not in conformity with Part 2 or RAMS (in its application to radio equipment).
(This note is not part of the Regulations)
These Regulations transpose Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC (OJ L 153, 22.5.2014, p.62) ("the Directive").
The Directive repeals and replaces Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (OJ L 91, 7.4.1999, p.10) which was implemented in the United Kingdom by the Radio Equipment and Telecommunications Terminal Equipment Regulations 2000 (S.I. 2000/730). These Regulations revoke and replace S.I. 2000/730.
Regulations 3 to 5 set out the application of the Regulations to radio equipment, as defined in regulation 2. Regulation 2 contains definitions of many of the terms used in the Regulations.
Part 2 sets out the obligations of economic operators.
Regulation 6 defines what are the essential requirements that radio equipment must meet, which include the protection of the health and safety of persons, the protection of property, ensuring an adequate level of electromagnetic compatibility with other equipment, and avoiding harmful interference in the radio spectrum .
Regulations 7 to 18 set out the obligations that are specific to manufacturers. Obligations include ensuring that radio equipment has been designed and manufactured in accordance with the essential requirements, having a relevant conformity assessment procedure carried out before the radio equipment is placed on the market and affixing the CE marking. Regulation 19 sets out the obligations which an authorised representative, appointed by a manufacturer, must and must not perform on the manufacturer's behalf. It also provides that the authorised representative, as well as the manufacturer, is then responsible for the performance of those obligations
Regulations 20 to 29 set out the obligations that are specific to importers. These obligations include that the importer must not place on the market radio equipment which is not in conformity with the essential requirements, must check that the manufacturer has carried out a relevant conformity assessment procedure and must ensure the radio equipment bears the name and address of the importer. Regulation 25 includes an obligation to ensure that, while the importer is responsible for radio equipment, the storage and transport of the radio equipment does not jeopardise its conformity with the essential requirements.
Regulations 30 to 35 set out the obligations that are specific to distributors. These obligations include acting with due care to ensure that radio equipment is in conformity with Part 2 when making it available on the market, and checking that radio equipment bears the CE marking. Regulation 33 contains an obligation to ensure that, while the distributer is responsible for radio equipment, the storage and transport of the radio equipment does not jeopardise its conformity with the essential requirements.
Regulations 37 to 39 set out obligations which apply to all economic operators. These obligations include making sure that the EU declaration of conformity is in English before radio equipment is placed on the market in the United Kingdom. Those regulations also include an obligation to identify other economic operators in the supply chain on request from a market surveillance authority and a prohibition on the improper use of the CE marking.
Part 3 sets out provisions concerning the conformity assessment procedures, declarations of conformity and CE marking for radio equipment.
Part 4 sets out provisions concerning the bodies which carry out conformity assessment procedures under the Regulations.
Part 5 sets out provisions for market surveillance and enforcement of these Regulations. Regulation 55 identifies the market surveillance authorities and regulation 56 identifies the enforcing authorities. Regulation 57 and Schedule 10 provide for the powers of the enforcing and market surveillance authorities. Regulation 65 provides for the contravention of certain provisions of these Regulations to be an offence. Regulation 66 sets out the penalties that are to apply for offences under these Regulations.
Part 6 sets out a review provision and transitional provisions and consequential amendments. Regulation 78 revokes the Radio Equipment and Telecommunications Terminal Equipment Regulations 2000 (S.I. 2000/730) (as amended) and provides that they continue to apply to radio equipment placed on the market before the date these Regulations come into force. Regulations 79 to 85 make consequential amendments.
A transposition note and full impact assessment of the impact that these Regulations will have on the costs of business, the voluntary sector and the public sector are available from the Single Market Product Safety Team, Department for Business, Energy and Industrial Strategy, 1 Victoria Street, London SW1H 0ET and are also published with the Explanatory Memorandum alongside these Regulations on www.legislation.gov.uk.
S.I. 1999/2788 to which there are amendments not relevant to these Regulations.
1972 c.68; section 2(2) was amended by section 27(1) of the Legislative and Regulatory Reform Act 2006 (c.51) and by Part 1 of the Schedule to the European Union (Amendment) Act 2008 (c.7). The enabling powers of section 2(2) were extended by virtue of the amendment of section 1(2) by section 1 of the European Economic Area Act 1993 (c.51).
Paragraph 1A of Schedule 2 was inserted by section 28 of the Legislative and Regulatory Reform Act 2006 and amended by Part 1 of the Schedule to the European Union (Amendment) Act 2008.
OJ L 153, 22.5.2014, p.62.
OJ L 96, 29.3.2014, p.79.
OJ L 108, 24.04.2002, p.33.
OJ L 316, 14.11.2012, p.12.
OJ L 218, 13.8.2008, p.30.
1985 c.72; section 69 was amended by Schedule 1 to the Statute Law (Repeals) Act 1989 (c.43); paragraph 75 of Schedule 16 to the Local Government (Wales) Act 1994 (c.19); and paragraph 144 of Schedule 13 to the Local Government etc. (Scotland) Act 1994 (c.39).
OJ L 96, 29.3.2014, p.357.
OJ L190/7 21.7.2017.
1980 c. 43. Section 58 was amended by paragraph 40 of Schedule 10 to the Crime and Courts Act 2013 (c. 22).
S.R. (NI) 1981 No 1675.
2015 c.26. Section 30(3) was amended by the Enterprise Act 2016 (c.12), section 19.
OJ L 91, 7.4.1999, p.10.
S.I. 2000/730; amended by S.I. 2003/1903, S.I. 2003/3144, S.I. 2005/281, S.I. 2015/1630 and S.I. 2016/1101.
S.I. 2004/693 to which there are amendments not relevant to these Regulations.
OJ L 46, 17.2.1997, p.25.
OJ L 79, 19.3.2008, p.1.
It is optional for the manufacturer to assign a number to the EU declaration of conformity.
